1080P Video Camera Doorbell Wireless Night Vision APP Control

1080P Video Camera Doorbell Wireless Night Vision APP Control



video camera doorbell wireless

• Camera Doorbell with wireless connection to a wireless WIFI router (Only support 2.4G, Not 5G ).

• 165° Diagonal /130°Horizontal view angle with 1080P 2.0MP HD camera lens for clear vision in day and night
• Support Sharing to Multi Users. After connecting to one user through the APP, it can be shared with other family members(max to 6) in the app. Everyone connected can view any images outside of the door.
• Micro SD Card Supported for Saving Recorded Videos. Supports up to 64GB capacity (32G SD card optional) for loop recording when motion is detected or a bell is calling. With a micro SD card inserted, the doorbell camera will record pictures or videos automatically.
• PIR Motion Detection. You can set up the PIR function to turn on/off from the Tuya App with 3 levels of sensitivity (low/medium/high). When at a high level, you will receive an app alert about motion detection in 1 second (This may be affected by your home wifi or internet signals ).
• Large Battery Capacity & Low Battery Consumption. 4500 mAh built-in battery with low consumption chip, lasts about 1-2 Months (3-5 times calling per day); Remember to charge it with a 5V2A charger at least 8-10 hours before the first use and installation after testing it.
• Installation Conditions. Peephole Diameter: 12-50mm
• Door Thickness Range: 35-120mm (please measure door thickness before purchase)








APP Download and WiFi Configuration

Method 1:Download the APP “Tuya Smart” or “Smart Life” in the Android or IOS APP store;

Method 2:Download by scanning the following QR code.

  1. Turn on the device (Switch on), Long press the home button for 5-6 seconds until the screen is off and on again (reset the device) ;
  2. Open Tuya ap-Add Device-Security & Video Surveillance-smart camera (Wi-Fi); select 2.4G wifi Network and enter the correct wifi password(make sure it is 2.4G WiFi, Not 5G);
  3. When the paring QR-code appears in the App; Scan the QR-code with the doorbell camera (15-20cm) until you hear the voice ” Connection successful” then the next step;
  4. After Paring successfully, you can edit the name of the doorbell camera; Enter the device monitor page for further settings.


Installation and Set Up


video camera doorbell wireless




Visits: 9